云主机性能测试脚本说明

云主机性能测试脚本
#!/usr/bin/env bash

##########
# nench.sh ("new bench.sh")
# =========================
# current version at https://github.com/n-st/nench
# - loosely based on the established freevps.us/bench.sh
# - includes CPU and ioping measurements
# - reduced number of speedtests (9 x 100 MB), while retaining useful European
#   and North American POPs
# - runs IPv6 speedtest by default (if the server has IPv6 connectivity)
# Run using `curl -s bench.wget.racing | bash`
# or `wget -qO- bench.wget.racing | bash`
##########

command_exists()
{
    command -v "$@" > /dev/null 2>&1
}

Bps_to_MiBps()
{
    awk '{ printf "%.2f MiB/s\n", $0 / 1024 / 1024 } END { if (NR == 0) { print "error" } }'
}

B_to_MiB()
{
    awk '{ printf "%.0f MiB\n", $0 / 1024 / 1024 } END { if (NR == 0) { print "error" } }'
}

redact_ip()
{
    case "$1" in
        *.*)
            printf '%s.xxxx\n' "$(printf '%s\n' "$1" | cut -d . -f 1-3)"
            ;;
        *:*)
            printf '%s:xxxx\n' "$(printf '%s\n' "$1" | cut -d : -f 1-3)"
            ;;
    esac
}

finish()
{
    printf '\n'
    rm -f test_$$
    exit
}
# make sure the dd test file is always deleted, even when the script is
# interrupted while dd is running
trap finish EXIT INT TERM

command_benchmark()
{
    if [ "$1" = "-q" ]
    then
        QUIET=1
        shift
    fi

    if command_exists "$1"
    then
        time "$gnu_dd" if=/dev/zero bs=1M count=500 2> /dev/null | \
            "$@" > /dev/null
    else
        if [ "$QUIET" -ne 1 ]
        then
            unset QUIET
            printf '[command `%s` not found]\n' "$1"
        fi
        return 1
    fi
}

dd_benchmark()
{
    # returns IO speed in B/s

    # Temporarily override locale to deal with non-standard decimal separators
    # (e.g. "," instead of ".").
    # The awk script assumes bytes/second if the suffix is !~ [TGMK]B. Call me
    # if your storage system does more than terabytes per second; I'll want to
    # see that.
    LC_ALL=C "$gnu_dd" if=/dev/zero of=test_$$ bs=64k count=16k conv=fdatasync 2>&1 | \
        awk -F, '
            {
                io=$NF
            }
            END {
                if (io ~ /TB\/s/) {printf("%.0f\n", 1000*1000*1000*1000*io)}
                else if (io ~ /GB\/s/) {printf("%.0f\n", 1000*1000*1000*io)}
                else if (io ~ /MB\/s/) {printf("%.0f\n", 1000*1000*io)}
                else if (io ~ /KB\/s/) {printf("%.0f\n", 1000*io)}
                else { printf("%.0f", 1*io)}
            }'
    rm -f test_$$
}

download_benchmark()
{
    curl --max-time 10 -so /dev/null -w '%{speed_download}\n' "$@"
}

if ! command_exists curl
then
    printf '%s\n' 'This script requires curl, but it could not be found.' 1>&2
    exit 1
fi

if command_exists gdd
then
    gnu_dd='gdd'
elif command_exists dd
then
    gnu_dd='dd'
else
    printf '%s\n' 'This script requires dd, but it could not be found.' 1>&2
    exit 1
fi

if ! "$gnu_dd" --version > /dev/null 2>&1
then
    printf '%s\n' 'It seems your system only has a non-GNU version of dd.'
    printf '%s\n' 'dd write tests disabled.'
    gnu_dd=''
fi

printf '%s\n' '-------------------------------------------------'
printf ' nench.sh v2017.06.01 -- https://git.io/nench.sh\n'
date -u '+ benchmark timestamp:    %F %T UTC'
printf '%s\n' '-------------------------------------------------'

printf '\n'

if ! command_exists ioping
then
    curl -s --max-time 10 -o ioping.static http://wget.racing/ioping.static
    chmod +x ioping.static
    ioping_cmd="./ioping.static"
else
    ioping_cmd="ioping"
fi

# Basic info
if [ "$(uname)" = "Linux" ]
then
    printf 'Processor:    '
    awk -F: '/model name/ {name=$2} END {print name}' /proc/cpuinfo | sed 's/^[ \t]*//;s/[ \t]*$//'
    printf 'CPU cores:    '
    awk -F: '/model name/ {core++} END {print core}' /proc/cpuinfo
    printf 'Frequency:    '
    awk -F: ' /cpu MHz/ {freq=$2} END {print freq " MHz"}' /proc/cpuinfo | sed 's/^[ \t]*//;s/[ \t]*$//'
    printf 'RAM:          '
    free -h | awk 'NR==2 {print $2}'
    if [ "$(swapon -s | wc -l)" -lt 2 ]
    then
        printf 'Swap:         -\n'
    else
        printf 'Swap:         '
        free -h | awk 'NR==4 {printf $2}'
        printf '\n'
    fi
else
    # we'll assume FreeBSD, might work on other BSDs too
    printf 'Processor:    '
    sysctl -n hw.model
    printf 'CPU cores:    '
    sysctl -n hw.ncpu
    printf 'Frequency:    '
    grep -Eo -- '[0-9.]+-MHz' /var/run/dmesg.boot | tr -- '-' ' '
    printf 'RAM:          '
    sysctl -n hw.physmem | B_to_MiB

    if [ "$(swapinfo | wc -l)" -lt 2 ]
    then
        printf 'Swap:         -\n'
    else
        printf 'Swap:         '
        swapinfo -k | awk 'NR>1 && $1!="Total" {total+=$2} END {print total*1024}' | B_to_MiB
    fi
fi
printf 'Kernel:       '
uname -s -r -m

printf '\n'

printf 'Disks:\n'
if command_exists lsblk
then
    lsblk --nodeps --noheadings --output NAME,SIZE,ROTA --exclude 1,2,11 | sort | awk '{if ($3 == 0) {$3="SSD"} else {$3="HDD"}; printf("%-3s%8s%5s\n", $1, $2, $3)}'
elif [ -r "/var/run/dmesg.boot" ]
then
    awk '/(ad|ada|da|vtblk)[0-9]+: [0-9]+.B/ { print $1, $2/1024, "GiB" }' /var/run/dmesg.boot
else
    printf '[ no data available ]'
fi

printf '\n'

# CPU tests
export TIMEFORMAT='%3R seconds'

printf 'CPU: SHA256-hashing 500 MB\n    '
command_benchmark -q sha256sum || command_benchmark -q sha256 || printf '[no SHA256 command found]\n'

printf 'CPU: bzip2-compressing 500 MB\n    '
command_benchmark bzip2

printf 'CPU: AES-encrypting 500 MB\n    '
command_benchmark openssl enc -e -aes-256-cbc -pass pass:12345678

printf '\n'

# ioping
printf 'ioping: seek rate\n    '
"$ioping_cmd" -DR -w 5 . | tail -n 1
printf 'ioping: sequential read speed\n    '
"$ioping_cmd" -DRL -w 5 . | tail -n 2 | head -n 1

printf '\n'

# dd disk test
printf 'dd: sequential write speed\n'

if [ -z "$gnu_dd" ]
then
    printf '    %s\n' '[disabled due to missing GNU dd]'
else
    io1=$( dd_benchmark )
    printf '    1st run:    %s\n' "$(printf '%d\n' "$io1" | Bps_to_MiBps)"

    io2=$( dd_benchmark )
    printf '    2nd run:    %s\n' "$(printf '%d\n' "$io2" | Bps_to_MiBps)"

    io3=$( dd_benchmark )
    printf '    3rd run:    %s\n' "$(printf '%d\n' "$io3" | Bps_to_MiBps)"

    # Calculating avg I/O (better approach with awk for non int values)
    ioavg=$( awk 'BEGIN{printf("%.0f", ('"$io1"' + '"$io2"' + '"$io3"')/3)}' )
    printf '    average:    %s\n' "$(printf '%d\n' "$ioavg" | Bps_to_MiBps)"
fi

printf '\n'

# Network speedtests

ipv4=$(curl -4 -s --max-time 5 http://icanhazip.com/)
if [ -n "$ipv4" ]
then
    printf 'IPv4 speedtests\n'
    printf '    your IPv4:    %s\n' "$(redact_ip "$ipv4")"
    printf '\n'

    printf '    Cachefly CDN:         '
    download_benchmark -4 http://cachefly.cachefly.net/100mb.test | \
        Bps_to_MiBps

    printf '    Leaseweb (NL):        '
    download_benchmark -4 http://mirror.nl.leaseweb.net/speedtest/100mb.bin | \
        Bps_to_MiBps

    printf '    Softlayer DAL (US):   '
    download_benchmark -4 http://speedtest.dal01.softlayer.com/downloads/test100.zip | \
        Bps_to_MiBps

    printf '    Online.net (FR):      '
    download_benchmark -4 http://ping.online.net/100Mo.dat | \
        Bps_to_MiBps

    printf '    OVH BHS (CA):         '
    download_benchmark -4 http://proof.ovh.ca/files/100Mio.dat | \
        Bps_to_MiBps

else
    printf 'No IPv4 connectivity detected\n'
fi

printf '\n'

ipv6=$(curl -6 -s --max-time 5 http://icanhazip.com/)
if [ -n "$ipv6" ]
then
    printf 'IPv6 speedtests\n'
    printf '    your IPv6:    %s\n' "$(redact_ip "$ipv6")"
    printf '\n'

    printf '    Leaseweb (NL):        '
    download_benchmark -6 http://mirror.nl.leaseweb.net/speedtest/100mb.bin | \
        Bps_to_MiBps

    printf '    Softlayer DAL (US):   '
    download_benchmark -6 http://speedtest.dal01.softlayer.com/downloads/test100.zip | \
        Bps_to_MiBps

    printf '    Online.net (FR):      '
    download_benchmark -6 http://ping6.online.net/100Mo.dat | \
        Bps_to_MiBps

    printf '    OVH BHS (CA):         '
    download_benchmark -6 http://proof.ovh.ca/files/100Mio.dat | \
        Bps_to_MiBps

else
    printf 'No IPv6 connectivity detected\n'
fi

printf '%s\n' '-------------------------------------------------'

# delete downloaded ioping binary if script has been run straight from a pipe
# (rather than a downloaded file)
[ -t 0 ] || rm -f ioping.static
云主机性能测试脚本说明 - 脚本下载

相关推荐
